The equipment used in dairy plants has advanced to become some of the most automated and complex in the food and beverage processing industry.

From bulk lines to pre-formed box packaging, JAX lubricants from Indlub can provide food-processing lubricants which exceed the demands of this highly efficient and technically demanding machinery.

  • JAX Halo-Guard FG and Poly-Guard FG series greases provide incredible anti-wear protection levels on filling, processing and other grease-lubricated applications used throughout the plant. Fully automated grease systems will run efficiently with the FG-LT and FG-00 versions of these greases.
  • JAX Gear-Guard FG synthetic open gear grease resists wash-off and sling on filler drive gears better than any open gear greases on the market.

dairy

Hydraulic Systems

Item stocked

Magna-Plate® 60, 62, 64, 66

NSF H1 - ISO 32, 46, 68, 100

America’s Finest Food-Grade Hydraulic Fluids can be used in a variety of applications where an NSF H1 fluid is required. They are food-grade, Group II white mineral-based oils containing rust and oxidation additives and excellent antiwear protection. They are fully tested and OEM-approved for hydraulic systems, and are recommended for compressors and gear systems requiring food-grade oils.

Item stocked

FGH-AW Series Hydraulic Oils

NSF H1 - ISO 32, 46, 68, 100

These compounded food-grade hydraulic oils were developed to satisfy several lubrication requirements in modern food-processing environments. These oils contain an effective combination of antiwear agents and rust inhibitors that provide performance advantages over non-compounded white oils. Will extend the life and lubrication intervals of costly equipment.


Separators

Available to order

Magna-Plate FG ISO Gear Oils

NSF H1 Semi-Synthetic - ISO 220FG, 320FG, 460FG

These gear oils are semi-synthetic, white oil-based with sheer stable V.I. modifiers. As a result, they can be used in gearbox applications previously thought to be too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. The high film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and worm gears. Contains Micronox.

Also available: Magna-Plate 320FG-HG3 upon request.


Homogenizers

Available to order

Magna-Plate FG ISO Gear Oils

NSF H1 Semi-Synthetic - ISO 220FG, 320FG, 460FG

These gear oils are semi-synthetic, white oil-based with sheer stable V.I. modifiers. As a result, they can be used in gearbox applications previously thought to be too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. The high film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and worm gears. Contains Micronox.

Also available: Magna-Plate 320FG-HG3 upon request.

Item stocked

Magna-Plate® 60, 62, 64, 66

NSF H1 - ISO 32, 46, 68, 100

America’s Finest Food-Grade Hydraulic Fluids can be used in a variety of applications where an NSF H1 fluid is required. They are food-grade, Group II white mineral-based oils containing rust and oxidation additives and excellent antiwear protection. They are fully tested and OEM-approved for hydraulic systems, and are recommended for compressors and gear systems requiring food-grade oils.

Item stocked

Magna-Plate 78

NSF H1

These fluids are heavy, tackified E.P. food-grade oils for superb wear protection on overhead chains and conveyors, drip systems, can lid cams, or anywhere a positive antiwear NSF H1-approved lubricant film is needed. Magna-Plate 76 is recommended for automatic oiling systems. Magna-Plate 78 and 78E (Emulsified) provide excellent anti-wear performance in Angelus Can Seamers.


Bearings

Item stocked

Poly-Guard FG-LT, FG-2

NSF H1

The ultimate in food machinery lubrication where high temperatures coupled with high bearing speeds and loads have caused premature wear to lubricated parts. Poly-Guard FG provides the highest level of antiwear performance in an NSF H1 grease, and incorporates Micronox technology. Poly-Guard FG-LT grade yields excellent performance in automated centralized lubrication systems. Excellent versatility and high-temperature performance make this a true plant-wide grease.

Item stocked

Halo-Guard FG Series

NSF H1 - FG-00, FG-LT, FG-2, FG-PM

This series of revolutionary food-grade grease is manufactured with proprietary antiwear chemistry that improves performance over all competitive CSC greases. A newly enhanced calcium sulfonate complex thickener provides exceptional mechanical stability, very high load-carrying (E.P.) ability and remarkable rust and corrosion control. In addition, JAX Halo-Guard FG has excellent water resistance and outstanding high-temperature performance abilities. This technology is combined with a new high viscosity, partial synthetic food-grade base fluid to make JAX Halo-Guard FG the most effective food-grade grease for heavily-loaded applications. This is a true high-performance, plant-wide food-grade grease.

Note: NZ (Non-Zinc) versions NZ-2 and NZ-LT available on request.


Air Line Lubrication

Item stocked / Available to order

Magna-Plate 72, 74

NSF H1 - Food Plant Air Line Lubrication

Magna-Plate 72 and 74 are low viscosity air line oils with rust inhibitor  for use in all air-operated equipment. Magna-Plate 74 contains an effective antiwear additive, additional rust inhibitors, and a high percentage of emulsifiers to pick up and exhaust tramp moisture in the air lines. Contains Micronox.

  • Magna-Plate 72 available to order
  • Magna-Plate 74 stocked

Gearboxes

Item stocked

Flow-Guard Synthetic Fluids

NSF H1 100% Synthetic - ISO Grades 22 through 680

For use in industrial hydraulic, gear drive and other lubricated machinery, this series of fluids is compounded to provide superior performance in severe applications such as positive displacement blowers, minimize component wear and eliminate system downtime.

Available to order

Magna-Plate FG ISO Gear Oils

NSF H1 Semi-Synthetic - ISO 220FG, 320FG, 460FG

These gear oils are semi-synthetic, white oil-based with sheer stable V.I. modifiers. As a result, they can be used in gearbox applications previously thought to be too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. The high film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and worm gears. Contains Micronox.

Also available: Magna-Plate 320FG-HG3 upon request.


Bottle & Can Fillers

Item stocked

Halo-Guard FG Series

NSF H1 - FG-00, FG-LT, FG-2, FG-PM

This series of revolutionary food-grade grease is manufactured with proprietary antiwear chemistry that improves performance over all competitive CSC greases. A newly enhanced calcium sulfonate complex thickener provides exceptional mechanical stability, very high load-carrying (E.P.) ability and remarkable rust and corrosion control. In addition, JAX Halo-Guard FG has excellent water resistance and outstanding high-temperature performance abilities. This technology is combined with a new high viscosity, partial synthetic food-grade base fluid to make JAX Halo-Guard FG the most effective food-grade grease for heavily-loaded applications. This is a true high-performance, plant-wide food-grade grease.

Note: NZ (Non-Zinc) versions NZ-2 and NZ-LT available on request.

Available to order

Magna-Plate 44-0, 44-1, 44-2

NSF H1

JAX Magna-Plate 44 series are high-performance food-grade greases formulated for broad use in all food and beverage processing environments. Enhanced antiwear protection and pumpability with low bleed and seperation characteristics make 44-0 and 44-1 ideal for all centralized greasing applications requiring food-grade greases. A high degree of water resistance, oxidation stability and antiwear protection allow this food-grade grease to perform in areas thought to be unacceptable for ordinary food-grade greases.

Item stocked

Magna-Plate® 60, 62, 64, 66

NSF H1 - ISO 32, 46, 68, 100

America’s Finest Food-Grade Hydraulic Fluids can be used in a variety of applications where an NSF H1 fluid is required. They are food-grade, Group II white mineral-based oils containing rust and oxidation additives and excellent antiwear protection. They are fully tested and OEM-approved for hydraulic systems, and are recommended for compressors and gear systems requiring food-grade oils.

Item stocked

Pyro-Plate TFS

NSF H1

JAX Pyro-Plate TFS is specially formulated to provide exceptional compatibility with EPDM seals while enhancing the performance  and reliability of valves and fittings utilized in the beverage industry. JAX Pyro-Plate TFS combines synthetic silicone base fluids with a polytetrafluoroethylene (PTFE) grease thickener system to provide outstanding lubricating performance in a broad range of applications where seal/elastomer compatibility and wear protection are critical to equipment operation. JAX Pyro-Plate TFS meets the requirements of 21 CFR 178.3570 (lubricants with incidental food contact).

Available to download

Pyro-Plate-TFS-engl-sds-090512

Can Seamers

Item stocked

Halo-Guard FG Series

NSF H1 - FG-00, FG-LT, FG-2, FG-PM

This series of revolutionary food-grade grease is manufactured with proprietary antiwear chemistry that improves performance over all competitive CSC greases. A newly enhanced calcium sulfonate complex thickener provides exceptional mechanical stability, very high load-carrying (E.P.) ability and remarkable rust and corrosion control. In addition, JAX Halo-Guard FG has excellent water resistance and outstanding high-temperature performance abilities. This technology is combined with a new high viscosity, partial synthetic food-grade base fluid to make JAX Halo-Guard FG the most effective food-grade grease for heavily-loaded applications. This is a true high-performance, plant-wide food-grade grease.

Note: NZ (Non-Zinc) versions NZ-2 and NZ-LT available on request.

Available to order

Magna-Plate 44-0, 44-1, 44-2

NSF H1

JAX Magna-Plate 44 series are high-performance food-grade greases formulated for broad use in all food and beverage processing environments. Enhanced antiwear protection and pumpability with low bleed and seperation characteristics make 44-0 and 44-1 ideal for all centralized greasing applications requiring food-grade greases. A high degree of water resistance, oxidation stability and antiwear protection allow this food-grade grease to perform in areas thought to be unacceptable for ordinary food-grade greases.

Item stocked

Angel-Guard Fluids

NSF H1 100% Synthetic - ISO 100D, 150D, E, 100E

State-of-the-art, 100% synthetic, food-grade antiwear fluids compounded to provide the ultimate in wear and corrosion protection. JAX Angel-Guard fluids provide long drain performance in recirculatng systems and include JAX complimentary, ongoing RPM Oil Analysis services. Formulated specially for high-speed beverage can seamers including those manufactured by Angelus Sanitary Can Machine Company.

Item stocked

Magna-Plate 78

NSF H1

These fluids are heavy, tackified E.P. food-grade oils for superb wear protection on overhead chains and conveyors, drip systems, can lid cams, or anywhere a positive antiwear NSF H1-approved lubricant film is needed. Magna-Plate 76 is recommended for automatic oiling systems. Magna-Plate 78 and 78E (Emulsified) provide excellent anti-wear performance in Angelus Can Seamers.


Bottle Cappers & Crowners

Available to order

Magna-Plate FG ISO Gear Oils

NSF H1 Semi-Synthetic - ISO 220FG, 320FG, 460FG

These gear oils are semi-synthetic, white oil-based with sheer stable V.I. modifiers. As a result, they can be used in gearbox applications previously thought to be too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. The high film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and worm gears. Contains Micronox.

Also available: Magna-Plate 320FG-HG3 upon request.

Item stocked

Halo-Guard FG Series

NSF H1 - FG-00, FG-LT, FG-2, FG-PM

This series of revolutionary food-grade grease is manufactured with proprietary antiwear chemistry that improves performance over all competitive CSC greases. A newly enhanced calcium sulfonate complex thickener provides exceptional mechanical stability, very high load-carrying (E.P.) ability and remarkable rust and corrosion control. In addition, JAX Halo-Guard FG has excellent water resistance and outstanding high-temperature performance abilities. This technology is combined with a new high viscosity, partial synthetic food-grade base fluid to make JAX Halo-Guard FG the most effective food-grade grease for heavily-loaded applications. This is a true high-performance, plant-wide food-grade grease.

Note: NZ (Non-Zinc) versions NZ-2 and NZ-LT available on request.

Available to order

Magna-Plate 44-0, 44-1, 44-2

NSF H1

JAX Magna-Plate 44 series are high-performance food-grade greases formulated for broad use in all food and beverage processing environments. Enhanced antiwear protection and pumpability with low bleed and seperation characteristics make 44-0 and 44-1 ideal for all centralized greasing applications requiring food-grade greases. A high degree of water resistance, oxidation stability and antiwear protection allow this food-grade grease to perform in areas thought to be unacceptable for ordinary food-grade greases.


Glacier Novelty Bar Machines

Item stocked / Available to order

Magna-Plate 80, 86, 88

NSF H1 100% Synthetic - Extreme Low Temperatures

These synthetic fluids are formulated with antiwear, rust inhibitor and ”non-drip“ additives for freezer chain and conveyor lubrication. The base fluids are food-grade synthetic oils with pour points as low as -90°F. These fluids have excellent penetration properties.

  • Magna-Plate 80 available to order
  • Magna-Plate 86 stocked
  • Magna-Plate 88 available to order
Item stocked

Flow-Guard Synthetic Fluids

NSF H1 100% Synthetic - ISO Grades 22 through 680

For use in industrial hydraulic, gear drive and other lubricated machinery, this series of fluids is compounded to provide superior performance in severe applications such as positive displacement blowers, minimize component wear and eliminate system downtime.

Item stocked

Magna-Plate 22

NSF H1 100% Synthetic

Extreme Low Temperature this is a unique 100% synthetic grease formulated for freezers and other applications where temperatures can approach -50°F (-46°C) and lower. It possesses excellent wear and rust protection in an extremely pumpable grease.

Available to download

Magna-Plate-22-EU-MSDS-051215

Plastic Bottle Blow-Molding

Item stocked

Flow-Guard Synthetic Fluids

NSF H1 100% Synthetic - ISO Grades 22 through 680

For use in industrial hydraulic, gear drive and other lubricated machinery, this series of fluids is compounded to provide superior performance in severe applications such as positive displacement blowers, minimize component wear and eliminate system downtime.

Item stocked

Magna-Plate® 60, 62, 64, 66

NSF H1 - ISO 32, 46, 68, 100

America’s Finest Food-Grade Hydraulic Fluids can be used in a variety of applications where an NSF H1 fluid is required. They are food-grade, Group II white mineral-based oils containing rust and oxidation additives and excellent antiwear protection. They are fully tested and OEM-approved for hydraulic systems, and are recommended for compressors and gear systems requiring food-grade oils.


PMC Packaging Machines

Available to order

Magna-Plate FG ISO Gear Oils

NSF H1 Semi-Synthetic - ISO 220FG, 320FG, 460FG

These gear oils are semi-synthetic, white oil-based with sheer stable V.I. modifiers. As a result, they can be used in gearbox applications previously thought to be too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. The high film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and worm gears. Contains Micronox.

Also available: Magna-Plate 320FG-HG3 upon request.

Available to order

Paper Cup Curl Oil

NSF 3H

JAX Paper Cup Curl Oil ISO 32 is compounded specifically for use in curling operation of machines manufactured by Paper Machinery Corporation.

This oil adheres to the guidelines set forth by the FDA and the USDA for their current Pan Release 3H Classification. This defines lubricant that are acceptable for use as a release agent for use on food-contact surfaces in offical establishments operating under the meat and poultry products inspection program

FDA guidelines currently met by this product fall under 21 CFR 173.340, 178.3620 (b) and GRAS (Generally Recognized as Safe) substances.

JAX Paper Cup Curl OIl ISO 32 also meets the established USDA guidelines for 3H (Release Agent).

Available to download

Paper-Cup-Curl-Oil-32-msds

Air Compressors

Available to order

Compresyn Series 550

NSF H1 - ISO 32 & 46

The COMPRESYN® 550 Series is a fist for the food-processing industry. COMPRESYN® 550 Series is a patent-pending synergistic blend of synthetic polyglycols, esters and selected additives compliant with 21 CFR 178.3570 and authorized as a “Lubricant with Incidental Food Contact” (USDA/NSF H1). COMPRESYN® 550 is formulated to provide superior performance and extended drain capabilities in rotary screw compressors while providing an H1 replacement for nonfood-grade polyglycol/ester compressor lubricants such as Sullube 32® and Ingersoll-Rand SSR Ultra Coolant™.

Available to download

Available to order

Compresyn Series 545

NSF H1 - ISO 46 & 100

COMPRESYN® 545 Series Compressor and Vacuum Pump fluidsare our premium, patented lubricants (Patent # US8, 183, 188 B2) for use in a variety of air compressor and vacuum pump equipment and critial applications.Critial performance features include low fluidvolatilit, enhanced water demulsibility, superior hydrolyticstability, improved sealing efect, reduced friction,enhanced wear protection, and superior fluid dispsing characteristics o eliminate “sludging” and deposit-forming tendencies.COMPRESYN® 545 Series Compressor and Vacuum Pump oils are fully compliant with 21 CFR 178.3570 and meets the requirements of USDA/NSF H1 (Lubricants with Incidental Food Contact).

Item stocked

Compresyn Series 405

NSF H1 - ISO 32, 46, 68, 100 & 150

COMPRESYN® 405 Series compressor oils are made from high quality, shear-stable 100% syntheticUSDA H1 authorized base oils. COMPRESYN® 405 Series oils provide long compressor life through reduced component wear, corrosion protection,water resistance and lubricant breakdown resistance. COMPRESYN® 405 Series oils reduce maintenance costs by extending drain intervals and lowering labor and used-product disposal requirements.

Item stocked

Compresyn Series 250

NSF H1 - ISO 46 & 100

COMPRESYN® 250 Series oils are semi-synthetic,patent-pending lubricants for use in a variety of compressor and vacuum pump equipment and critial applications.Performance features include: low fluidvolatilit, enhanced water demulsibility and hydrolyticstability, improved sealing efect, reductionin frictionand enhanced wear protection,and outstanding fluiddispersancy to eliminate “sludging” and deposit-forming tendencies.  COMPRESYN® 250 Series oils are fully compliant with 21 CFR 178.3570 and meet the requirements of USDA/NSF H1 (Lubricants with Incidental Food Contact).


Automated Lubrication


Industrial Lubricants provides complete plant design and implementation of automated lubrication systems for all processing phases in the plant. For more information, please contact us at sales@indlub.co.uk